STYCAST U2500電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰 STYCAST U 2500 is an encapsulant designed for
transformer, PCB's and other insulation applications. It allows
for complete impregnation when used either on small slightly
wound coils or large castings.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Part A Properties
Viscosity @ 25 °C, mPa∙s (cP) 12,500
Density , g/cm3 1.5
Shelf Life @ 18 to 25°C, months 6
Flash Point - See SDS
Part B Properties
Viscosity @ 25 °C, mPa∙s (cP) 0.05
Density , g/cm3 1.25
Flash Point - See SDS
Mixed Properties
Mixed Viscosity @ 25°C, mPa•s (cP) 6,000
Pot Life @ 25 °C, hours 2
Flash Point - See SDS
TYPICAL CURING PERFORMANCE
Cure Schedule
24 hours @ 25°C or
4 hours @ 60°C
Complete cure at room temperature will be obtained after 2 to 3days.
A post cure of 2 hours @ 100 to 120°C will improve final
end-properties.
Storage
This material is moisture sensitive and must be stored in tightly closed
containers at the recommended storage temperature. Partially used
containers should be blanketed with dry nitrogen before resealing.
Store product in the unopened container in a dry location. Storage
information may be indicated on the product container labeling.
Optimal Storage : 18 to 25 °C
樂泰 STYCAST U 2500是一種專門設計的密封劑
變壓器，PCB等絕緣應用。它允許
完全浸漬時使用時要小些
纏繞線圈或大型鑄件。
固化材料的典型特性
部分A屬性
25℃時的粘度，mPa•s（cP）12,500
密度，g /cm31.5
保質期為18至25°C，月6
閃點 - 見SDS
B部分屬性
粘度@ 25℃，mPa•s（cP）0.05
密度，g /cm31.25
閃點 - 見SDS
混合屬性
混合粘度@ 25℃，mPa•s（cP）6000
25°C，小時2
閃點 - 見SDS
典型的固化性能
治愈時間表
25°C或24小時
60℃下4小時
2〜3天后，室溫下完全固化。
在100至120°C的2小時后固化將提高*終效果
終端屬性。
存儲
這種材料是潮濕敏感的，必須密封儲存
容器在推薦的儲存溫度。部分使用
容器應覆蓋干燥氮?dú)猓?/TD>
|
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。