樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/樂泰 3733電子組裝/工業(yè)膠水/電子組裝膠水/工業(yè)用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰®3733™ is a UV light curable sealant for LCD
end-sealing applications.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Flash Point - See MSDS
Viscosity @ 25°C, mPa•s (cP):
Haake viscometer, PK1, 2°:
Constant shear rate @ 36 s
-1 12,000 to 16,500LMS
TYPICAL CURING PERFORMANCE
樂泰®3733™ cures when exposed to UV radiation of 365
nm. To obtain a full cure on surfaces exposed to air, radiation
at 220 to 260nm is required. The cure rate and ultimate depth
of cure will depend on the UV intensity, the spectral distribution
of the light source, the exposure time and the light
transmittance of the substrates.
Tack Free Time
Tack Free Time is the time required to achieve a tack free
surface.
Tack Free Time, seconds:
UVALOC®
1000:
40 mW/cm2 @ 365 nm ≤15LMS Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties. 樂泰®
3733™是用于LCD的UV光固化密封劑
端密封應用。
固化材料的典型特性
閃點 - 參見MSDS
25℃下的粘度，mPa•s（cP）：
Haake粘度計，PK1，2°：
36 s的恒定剪切速率
-1 12,000至16,500LMS
典型的固化性能
樂泰®
3733™在暴露于365的紫外線輻 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。