|
北京蒙駿力達科技有限公司
| 聯系人：馬經理
先生 (銷售經理) |
| 電 話：010-56236783 |
| 手 機：13439500039 |
 |
|
 |
|
| DH-BudenbergCPB8000全自動活塞壓力計 |
DH-BudenbergCPB8000全自動活塞壓力計
- ranges: up to 1000 bar (pneumatic)
- ranges: up to 5000 bar (hydraulic)
- accuracy: to 0.002 %
Applications
• Combining automation with high level primary pressure standard
• A powerful solution for testing and calibration of high specifications pressure sensors
• Automatic calibration and verification of pressure measuring instruments
• Large volume calibrations
Special Features
• Total measurement uncertainty to 20 ppm of measured value
• Calibration certificate as a standard from our COFRAC accredited laboratory, LNE/PTB calibration certificate as an option
• Available up to 1000 bar pneumatic and 5000 bar hydraulic
• Automatic 100 kg mass loading system with resolution down to 0.1 g
• Automatic pressure generation
Automatic pressure balance model CPB8000
Description
Reference primary standards
Pressure balances are high accuracy fundamental pressure standards that define the derived unit of pressure directly from the fundamental units of mass, length and time following the formula p= F/A.
The direct measurement of the pressure with an automatic balance combined to the know-how of Desgranges & Huot guarantees the best metrological specifications on the market.
• High quality piston-cylinder units (high floating time, long term stability)
• Protection and smooth handling of the mass set
Large volume calibration
CPB8000 has been designed to provide the best available metrological specifications but also to reply to industry expectations. Providing a high MTBF, the CPB8000 pressure generation system can also generate and regulate with large volume under test. Automation and metrology
The servo controlled variable volume pressure generator combined to the built-in optical detection used to measure the piston position offer fine and reliable pressure regulation. The mass set protected in a cabinet is handled carefully providing the highest stability. Finally the pressure is automatically fully corrected taking in account all ambient parameters.
High-performance instrument range
The model CPB8000 is available in 4 variants:
• pneumatic or hydraulic pressure generation
• with or without the trim mass set handling system (down to 10 mg)
A large range of piston-cylinder assemblies is available to best meet your specific requirements. |
 |
| |
| 北京蒙駿力達科技有限公司 |
|
| 電 話： |
010-56236783 |
| 傳 真： |
|
| 移動電話： |
13439500039 |
| 公司地址： |
中國北京通州區北京市通州區工業開發區云杉路 |
| 郵 編： |
101113 |
| 公司主頁： |
http://bjmjld.qy6.com.cn( 加入收藏) |
|
|
|
 |
|
|
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。