ESTANE S368D TPU
Technical Data Sheet Type: ESTANE廬 S368D is a Shore 68D, polyester based thermoplastic polyurethane (TPU) with excellent transparency. Uses: Injection Molding Physical Properties Standard No. Units Value Hardness ASTM D2240 Shore D 68 Specific Gravity ASTM D792 g/cm3 1.27 Mechanical Tensile Stress: ASTM D412 kgf/cm2 At *** elongation 260 At 300% elongation 390 Tensile Strength ASTM D412 kgf/cm2 450 Ultimate Elongation ASTM D412 % 380 Tear Resistance (Die C) ASTM D624 kgf/cm 220 Abrasion Loss ISO 4649 mm3 25 Compression Set ASTM D395 At 23擄C X22hr % 25 At 70擄C X22hr % 40 Mold Shrinkage ASTM D955 m/m 0.004 Thermal Vicat Softening Temperature ASTM D1525 擄C 125 *Test samples were annealed at 100oC and 24 hours at room temperature before testing. **These are typical values and should not be used for specifications. Injection Molding Guide These settings are to be used only as a guide. This is a typical injection molding temperature profile based on |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。