樂泰 3720電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
PRODUCT DESCRIPTION
樂泰(TM) Product 3720 is a single component, UV curable
coating resin. This product is specially formulated for moisture
protection on terminals of TAB mounts or COG of LCD
module. Its high flexibility and good moisture resistance provide
enhanced protection.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Acrylate
Appearance Transparent amber liquid
Specific gravity @ 25 °C 1.03
Viscosity @ 25 °C, mPa.s 2,600
Brookfield RVT,
Spindle 5 @ 20 rpm
Viscosity @ 25 °C, mPa.s 2,500
HAAKE viscometer, PK 1, 2°
Constant shear rate @ 36 1/s
TYPICAL CURING PERFORMANCE
樂泰® Product 3720 can be cured by irradiation with
ultraviolet of sufficient intensity. To obtain full cure on surfaces
exposed to air, the intensity of UV radiation at 220 to 260 nm
will accelerate the tack free cure of surface. The cure rate and
ultimate depth of cure will depend on light intensity, the spectral
distribution of the light source, the exposure time and the light
transmittance of the substrates. Following data are measured
at UV intensities of 100mW/cm2
using high pressure mercury
UV lamp
Storage
Maximum shelf life may be obtained when product is stored in
original containers, dry and dark location at a temperature
between 15
°C to 27
°C. Below 15
°C, the material may
crystallize. To restore fully, warm to 30
°C and shake or stir
產品描述
樂泰（TM）產品3720是單一組分，可UV固化
涂料樹脂。本產品是專門為潮濕而配制的
TAB安裝座或液晶顯示器COG端子上的保護
模塊。其高靈活性和良好的防潮性
增強保護。
不良材料的性質
典型值
化學型丙烯酸酯
外觀透明琥珀色液體
比重@ 25°C 1.03
粘度@ 25℃，mPa.s 2,600
布魯克菲爾德RVT，
主軸5 @ 20 rpm
粘度@ 25°C，mPa.s 2500
HAAKE粘度計，PK 1，2°
恒定剪切速率@ 36 1 / s
典型的固化性能
樂泰®產品3720可以通過照射來治愈
紫外線強度足夠強。獲得表面上的完全固化
暴露在空氣中 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。