樂泰 435平板電腦/筆記本ipad專用膠水，樂泰膠水
技術服務熱線：021-51693135 / 021-22818476
樂泰® 435™ is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock. The product provides rapid bonding on a wide range of materials, including metals, plastics and elastomers, as well as porous and absorbent materials like wood, paper, leather and fabric. ISO-10993 An ISO 10993 Test Protocol is an integral part of the Quality Program for 樂泰® 435™. 樂泰® 435™ has been qualified to 漢高's ISO 10993 Protocol as a means to assist in the selection of products for use in the medical device industry. Certificates of Compliance are available on 漢高's website or through the 漢高 Quality Department. Note: This is a regional approval. Please contact your local Technical Service Center for more information and clarification. TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.1 Flash Point - See MSDS Viscosity, Cone & Plate, mPa•s (cP): Temperature: 25 °C, Shear Rate: 1,000 s -1 100 to 250LMS TYPICAL CURING PERFORMANCE Under normal conditions, the atmospheric moisture initiates the curing process. Although full functional strength is developed in a relatively short time, curing continues for at least 24 hours before full chemical/solvent resistance is developed. Cure Speed vs. Substrate The rate of cure will depend on the substrate used. The table below shows the fixture time achieved on different materials at 22 °C / 50 % relative humidity. This is defined as the time to develop a shear strength of 0.1 N/mm2. Fixture Time, seconds: Steel (degreased) 30 to 45 Aluminum (Isopropanol wiped) ≤60LMS Zinc dichromate 90 to 105 Neoprene 30 to 45 Rubber, nitrile
樂泰®
435™是一種橡膠增韌粘合劑
增加柔韌性和剝離強度
耐沖擊。該產品提供快速粘合
廣泛的材料，包括金屬，塑料和
彈性體，以及多孔和吸收材料
木材，紙，皮革和織物。
ISO-10993
ISO 10993測試協議是質量的組成部分
樂泰®計劃
435™。 樂泰®
435™有 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。