CS15H-16C鐘形浮子（倒吊桶）式
CS45H-16C
CS15H-16C
主要性能參數:Main Speciflcation
公稱壓力Nominal pressure:
1.6Mpa/2.5Mpa/4.0Mpa 殼體試驗壓力Shell test pressure:
2.4Mpa/3.8Mpa/6.0Mpa
*高工作溫度:250℃/425℃
Maximium wording temp(TMO) 過冷度≤3℃
Condensate depression
*高允許溫度:425℃/475℃
Max temp *高背壓率:85%
Max backing pressure rate
主要零件材料表:Materials for main parts
名稱
Name 材料
Material
閥體、閥蓋
Body、Bonnet WCB/WC6/304
閥座、閥芯
Body、Bonnet STL
吊桶
Bucketfloat 304/316
杠桿
lever 304/316
過濾網
Gauze filter 304/316
用途：Utility
★該閥廣泛用于石油、化工、電力、紡織印染、等行業的各種蒸汽加熱設備、蒸汽管網、凝結水回收工程和低過熱蒸汽工況。它能迅速、自動排除結水，有效地阻止蒸汽泄漏。
●It is widely in sectors of petroleum,chemical,power,printing and dyeing textile for heating and steaming system,condensation water recyeling and over heating steam projects.It removes condensation water and stop leasage.
優點：Advantage
★鈷、鉻、鎢合金密封面，使用壽命長。閥座和球形閥芯采用優質合金，耐磨損，耐腐蝕，經久耐用。
★球形閥芯密封好。采用磨削加工并在機械裝置上與閥座配研的球形閥芯，密封性能好，在工作時無集中磨損，能延長使用壽命。
★汽水分離可靠。倒置桶向下的開口和閥座孔均處于液封狀態，蒸汽不能到達被水密封的閥孔，能可靠地將水、汽分離。
★排空氣性能好。倒置桶上沒有溢出排氣孔，可有效地阻止蒸汽汽鎖、空氣所堵現象。
★背壓高（85%）有利于在凝結水回收系統中使用。
★耐水擊。開口桶結構不會由于水擊現象而遭損壞。
★維護簡便。內部零件采用不銹鋼制造，均安裝在閥蓋上，并沒有過濾網裝置，是常維護簡便。
★可選擇有內裝式止回閥裝置。帶有內裝止回閥是一種適用在低過熱汽工況上的理想疏水閥。 
●The cover uses cobalt-chromium-tungsten alloy,featuring long durability.Unit base and globe valve spool are made out of quality alloy,which boasts anti-abrasive ability and good corrosion resistance.
●Globe valve featuring good tightness.Globe valve spool,which uses abrasive machining featuring good tightness,non-focus abrasion procedure can extend using durability.
●Reliable seperation ability between air and water.inverted tand and valve base liquid blocded to stop steam from arriving valve ga-te,seperating the steam and water.
●Good air-out ability. Air-out hole on the tank can avoid steam and block.
●High backing pressure.Used in condensation water recycling system.
●Easy maintenance Inner parts are made out of stainless steel,it also has screen for easy maintenance.
●Built-in check valve system.It is ideal valve for steam and over-heating steam.
工作原理：Principle of Work
倒置桶疏水閥的開啟和關閉是根據凝結水和蒸汽的密度差來動作的，凝結水可直接驅動疏水閥啟閉，其動作準確，可靠性高。
Open and shut-down is operated by the density variati on bet ween condensation water and steam,Condesation water can drive valve directly,featuring precision and reliability. |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
閥門
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。
聯系信息