本品已通過ISO2001質量管理認證
WX-TS6脫水型防銹油
一、作用
主要作用于不同行業的黑色和有色鋼鐵的表面防銹處理。比如：軸承防銹油，鈑金，五金，緊固件，齒輪，等等。使用效果好，防銹性能強。
二、特色
可以將帶水的工件放入其中，形成一層致密的保護油層，可以大大提高鋼鐵零件的抗銹的能力�？梢越鉀Q客戶鹽霧試驗不足的問題。還可以提供SGS專門檢測報告
三、外觀及特點
色澤 外觀 狀態 pH值 比重 粘度（50C）
淺棕色 清澈透明 液態 6.95-7.01 0.9150.02 3.956.75 mm2/s
四、使用方法
1．浸泡法：把除油好的鋼鐵浸入本品6-9分鐘，在這里面每隔23分鐘上下抖動一次。
2．刷涂法：直接把蘇州脫水防銹油刷或噴在被防銹的鋼鐵表面。
五、注意要點
1．使用浸泡法時，油槽體底部需要有支架，并放置放水開關口和測量水位的卡口，當水位高于支架時，必須及時把底部的水給排出來。
2．采用本品的時候切勿加溫，注意著火。
3．若遇到氣溫較冷的時候，可能會形成塊狀物體，此時可緩慢加熱到45度，將這些塊狀的東西慢慢溶解，再繼續使用，不會對防銹效果產生影響。
六、防腐指標檢測
按照GB/H3652-27昆山防銹油濕熱檢驗方法。
七、包裝、儲存
20公斤/桶的包裝。防銹油的儲存溫度是-1036C，嚴謹高溫、暴曬，可以長期儲存不會變質。
客戶說明：
1.我司生產的防銹油可以大大提高鹽霧時間，還可以為客戶提供SGS檢測報告
2.上海路豐助劑有限公司生產的昆山脫水防銹油質量穩定，消耗量小，做出來的產品效果好，長期以來一直得到客戶的好評。
3.前處理是非常關鍵的一部，如果前處理不好會對磷化有很大影響。
4.蘇州脫水防銹油前處理主要包括除油，酸洗等工序，比方說如果除油不徹底，可能導致的是黑色磷化膜便面有花斑。
5.著色前必須水洗，而且需要注意的是著色劑千萬不能加熱，很有可能導致著色劑不穩定，甚至出現報廢的可能。
6.著色劑時間也不要太長，看見有一層黑膜就可以了，否者可能會導致黑磷化掉膜。
7.有人說我們的高溫發黑操作簡單，看起來美觀。但是它能耗大，效率低下，特別是耐腐蝕性很差，鹽霧時間只能達幾個小時，最多就十幾個小時。
8.發黑和我們的黑色錳系磷化鹽霧時間是沒法比的，我們可以達到72小時，
9.現在一些汽車零部件嚴禁使用發黑工藝，采用錳系磷化，特別是老外他們一般都要求磷化處理。
10.有些人說我們蘇州脫水防銹油價格不便宜，但我想說一分錢一分貨。
11.我們的磷化液配水后要加碳酸鈉中和一部分磷酸鹽。這是因?yàn)槲覀兊暮谏谆簼舛雀撸院笙牧恳驳汀?
12.一般老客戶只要用了我們的產品就不會換了。昆山脫水防銹油廠家他們知道我們，信任我們。
13.我們的客戶遍及全國各大城市，特別是江浙滬等工業較為發達的地方。
14.我們可以為客戶提供小樣先試
1. Our production of rust-preventative oil can greatly improve the salt fog time, can also provide for the customer SGS test report
2. Shanghai road feng auxiliaries co., LTD. Is the production of kunshan dehydration rust-preventative oil stable quality, consumption is small, to make the product effect is good, has long been have won high appreciation among our customers.
3. Pretreatment is very key part, if pretreatment is bad to can has a great influence on phosphate.
4. Suzhou dehydration rust-preventative oil pretreatment including except oil, acid pickling process such as, say, if oil removing not thoroughly, can lead to a black phosphating film and surface has spots.
5. Must be washed before coloring, and need to pay attention to is stain mustn't heating, is likely to lead to stain is not stable, appear even scrapped may.
6. Coloring time also do not want too long, and, behold, there came a layer of black film, no person may result in black phosphating off membrane.
7. Some say our high temperature nigrescence simple operation, it looks beautiful. But its energy consumption is large, inefficient, especially corrosion resistance is very poor, salt fog time can only for hours, at most, 10 hours.
8. Black and our black manganese series phosphate salt fog time is can't ratio, we can reach 72 hours,
9. Now some parts of the car it is strictly prohibited to use black technology, using manganese series phosphating, especially foreigners they generally require phosphating.
10. Some people said we suzhou dehydration rust-preventative oil price is not cheap, but I want to say a penny a points cargo.
11. Our phosphating liquid water distribution after add sodium carbonate neutralization part of phosphate. This is because our black phosphating solution concentration is high, the later consumption is also low.
12. General and old customers as long as used our products will not change. Kunshan dehydration rust-preventative oil factory they know us, trust us.
13. Our customers all over the country's major cities, especially in jiangsu, and other industrial more developed place.
14. We can provide for the customer small kind try first |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
化工助劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。
聯系信息