每班結束時應做工作1) 利用水稱量進水管路加水清洗攪拌主機內殘留混凝土,如有結塊,應即時鏟 除(特別注意卸料門與拌筒、葉片與襯板間有無結塊),檢查主機蓋與水泥稱連接口處,與除塵器連接口處是否有堵塞孔口的結塊.
At the end of each class should do the work of 1) using water inlet pipe weighing water cleaning agitator in the residual concrete, such as agglomeration, should immediately eradicate (pay special attention to the discharge gate and the mixing drum, blade and liner with or without caking), check the cover and cement connecting mouth connected with a dust collector the mouth are caking jam orifice.
2) 將攪拌主樓內設備各處及樓層殘留堆積的粉塵等雜物清理、清洗干凈.
2) cleaning and cleaning the debris and other debris in the main building of the main building and the remaining accumulated dust in the floor.
3) 清除混凝土卸料斗內殘留物.
3) remove the residues in the concrete discharge hopper.
4) 氣路系統各氣缸活塞桿加注潤滑脂;各倉底卸料門回轉潤滑處加潤滑脂.
4) the lubricating grease is added to the cylinder piston rod of the pneumatic system, and the lubricating grease is added in the turning and lubricating place of the discharging door.
5) 將氣路系統中余氣放盡;各氣缸、氣閥應復位關閉.
5) put out the residual gas in the gas system, and the cylinders and valves should be reset and closed.
6) 冬季應將供水系統中的水全部放凈.
6) in winter, all the water in the water supply system should be cleaned.
7) 檢查各減速機有無滲漏油現象.
7) check the leakage of each reducer.
8) *后關閉各路電源及總電源.
8) finally close the power supply and the total power supply.
公司名稱：濟南笨鳥先飛自流平服務中心
聯系人：騰師傅
聯系電話1：18560146326
聯系電話2：13688634565
固定電話：0531-58969192
地址：濟南市各地均可服務
諾商基于多年的優化經驗和品牌基礎推出的諾商商道系統，諾商信息您身邊的互聯網專家！ |
 |
|
手機站
您當前位置是：產品大全 >> 建筑、建材 >>
水泥及制品
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。
聯系信息