樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝 工業(yè)膠水/電子組裝膠水/工業(yè)用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰®3106™ is primarily designed for bonding rigid or flexible PVC to polycarbonate where large gap filling capabilities and flexible joints are desired. The product has shown excellent adhesion to a wide variety of substrates including glass, many plastics and most metals.
The thixotropicnature of 樂泰®3106™ reduces the migration of liquid product after application to the substrate. TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.08Refractive Index 1.48Flash Point - See MSDSViscosity, Brookfield - RVT, 25 °C, mPa•s (cP):Spindle 4, speed 20 rpm 3,500 to 7,500LMSTYPICAL CURING PERFORMANCE樂泰®3106™ can be cured by exposure to UV and/or visible light of sufficient intensity. To obtain full cure on surfaces exposed to air, radiation @ 220 to 260 nm is also required. The speed of cure will depend upon the UV intensity and spectral distribution of the light source, the exposure time and the light transmittance of the substrates.
Stress Cracking Liquid adhesive is applied to a polycarbonate bar 6.4 cm by13 mm by 3 mm which is then flexed to induce a known stress level.
Stress Cracking, ASTM D 3929, minutes:7 N/mm2 stress on bar >1512 N/mm2 stress on bar 13 to 14 Storage.
Store product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
樂泰®3106™主要設計用于將剛性或柔性PVC粘合到具有大間隙填充的聚碳酸酯中能力和柔性接頭是理想的。
該產品具有優(yōu)異的粘附性，適用于各種基材，包括 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。